3D Pen QW01-14S 3D Drawing Pen with Free 10 Meters PCL 1.75mm Filament Low Temperautre Smart 3D Printing Pen Doodler DIY

14S 3D Pen Low Temperature Type 3D Printing Pens Simplifized Operation Special Designed for Kids

3D Pen Features:

1. QW01-14S 3D pen use 1.75mm PCL plastic filaments, this kind material is environment-friendly and harmless to human body, low melting point 70-80 degrees Celsius and pen nozzle temperature as low as 40 degrees Celsius, it’s safe special for children use;

2. Simplified operation, this 3D pen remove complexity to simple, only with two buttons, filament loading and unloading support manual mode and automatic mode switchable, offering you a hassle-free 3D creating experience

3. 3D Pen length at 16cm and the pen holding place diameter is only 1.5cm, net weight only 40g, offering you comfortable feelings with grip

4. 3D Pen nozzle is made of aviation ceramic material, the coefficient of thermal expansion is low, it’s difficult to be out of shape at high temperature

5. Special customized high precision gear set to ensure the filament extrude out smoothly non-blocked;

6. Low working voltage DC 5V-2A, support powered by mobile phone power bank or USB hub, enabling you drawing anywhere not limited to wall outlets and more safe

7. Intelligent sleep function, it will automatically sleep after complete unloading filement or 2 minutes without operating, it’s energy-saving and safe.

8. QW01-14S 3D pen with the CE, FCC, RoHS certifications.

Set up your 3D Pen QW01-14S

1. Connected the 3D pen’s power, the power indicator lights yellow;

2. Click the filament enter button, the heating indicator lights red and pen begins to heat up;

3. The heating indicator turns green, preheating is completed. Now press or double-click the filament enter button and insert filament, you can do 3D drawing after the filament extrudes from the outlet;

4. While you are drawing or exchange filament, double-click the filament enter button or return button, 3D pen automatically load or remove filament; one again click the filament enter button or return button can exit automatic mode to manual mode;

5. Intelligent sleep function after 2 minutes without operation, and click filament enter or return button to wake-up.

Hidden Function:

If the filament get stuck in the 3D pen, or insert wrong type of filament, the 3D pen can be set to a high temperature heating model to melt the filament, and run out of the stuck filament.

1) connect 3D pen to power, hold on press ” return button ” for 3 – 5 seconds, then will appear a red indicator flash, this says the 3D pen is prepared go into high temperature heating model;

2) click ” enter button ” , the 3D pen begin heating up, this peroid need about 1 minutes, until you see the indicator turn color from red to green, it says the 3D pen complete heating up.

3) Press ” enter button ” agian to run out of the filament.

4) Next time when connect to power, the 3D pen will automatically reset to normal working model.

Safe & Convenient

QW01-14S 3D pen working voltage DC5V-2A, support mobile power supply and any USB hub. It enables you drawing at anywhere unlimited, and more safe for kids use without connected to wall socket.

Harmless & Environmental-friendly PCL

PCL material is biodegradable, good flexibility and no plastic odor, harmless to human body, melt point at 70 degrees Celsius, much lower than ABS and PLA material.

Low Temperature Protection

QW01-14S 3D Pen is designed for PCL material, while working pen tip temperature as low as 40 degrees Celsius offering kids a safe 3D creating.

Modifying & Repairing Plastic Objects

The melted plastic that comes out of 3D printing pen can bond to most surfaces, because of this, 3D printing pen is ideal for modifying and repairing other 3D printed object.

Creating Freehand 3D Objects in Space

Filament extrudes out at a constant and reasonable speed, quickly cooling and solidify, automatically feeding & manual control feeding filament switchable freely enabling you drawing objects in empty space.

Standard Package Contents:

1x QW01-14S 3D pen
1x Power adapter ( EU/AU/US/UK )
1x Power cable
1x Transparent drawing pad
1x Stencil Book ( we free proivde more copys by email )
2x PCL filaments for testing (5 meters per loop, total 10 meters, in random colors)
1x User guide

When buy 3D pen add extra 50 meters PCL filament, as the standard package includes 10 meters PCL, so the package comes with total 60 meters PCL filament.

Works by QCREATE 3D Pen